Change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically.
However, if you are an advanced user, you might want to manually change settings such as the IP
address, subnet mask, or the default gateway.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP
address during the installation, your network components cannot connect with the printer.
1.
Open the embedded web server (EWS). For more information, see To open the embedded
web server.
2.
Click the Network tab, and then click IPv4 in the Wired (802.3) section.
3.
In the IP Address Configuration section, click Manual.
4.
A message appears warning that changing the IP address removes the printer from the
network. Click OK to continue.
5.
Change the IP settings:
•
Manual IP Address
•
Manual Subnet Mask
•
Manual Default Gateway
6.
Click Apply.