Embedded web server cannot be opened
Check your network setup
Make sure you are not using a phone cord or a crossover cable to connect the
printer to the network.
Make sure the network cable is securely connected to the printer.
Make sure the network hub, switch, or router is turned on and working correctly.
Check the computer
Make sure the computer that you are using is connected to the network.
NOTE: To use the EWS, the printer must be connected to a network using either
an Ethernet or a wireless connection. You cannot use the embedded web server if
the printer is connected to a computer with a USB cable.
Check your web browser
Make sure the web browser meets the minimum system requirements. For more
information, see Embedded web server specifications.
If your web browser uses any proxy settings to connect to the Internet, try turning
off these settings. For more information, see the documentation available with
your web browser.
information, see the documentation available with your web browser.
Solve a problem
Check the printer IP address
To check the IP address of the printer, obtain the IP address on the network
configuration page. To print a network configuration page, press and hold the
(Resume) button, and then press the
Ping the printer using the IP address from the command prompt (Windows) or
from Network Utility (Mac OS X). (Network Utility is located in the Utilities folder
in the Applications folder at the top level of the hard disk.).
For example, if the IP address is 188.8.131.52, type the following at the
command prompt (Windows):
- OR –
In Network Utility (Mac OS X) click the Ping tab, type the 184.108.40.206 in the
box, and then click Ping.
If a reply appears, the IP address is correct. If a time-out response appears, the
IP address is incorrect.